67512 Taper roller bearing with flange
The tapered roller bearing 67512 is used to withstand a combination of radial and axial loads. These bearings are composed of four main components: outer ring with flange, inner ring, separator, and a set of rollers. When disassembling dimensions, measuring the outer diameter or width through a separator (with the outer ring remaining in the casing or broken) often results in incorrect data. The rolling element is conical (the diameter on one ring is greater than the diameter on the other ring), so the bearing senses the load at a certain contact angle, partially operating under axial load and partially operating under radial load. In addition, this design allows for rotation on the tracks of the outer and inner rings without the need for sliding rollers.
BT1-0747C or 32212R