Deep bearings (GB/T 276-2003), formerly known as single-row centripetal bearings, are the most widely used rolling bearings. In Liaocheng Sunspeed, there are various types of deep groove ball bearings: such as 626ZZ(6*19*6) min-deep groove ball bearings, 6901ZZ(12*24*6) thin-deep groove ball bearings, 6202ZZ(15*35*11) deep groove ball bearings, 6005 2RS(25*47*12), SS6204Z(20*47*14), 6313 2RS(65*140*33), 6309 2RS(45*100*25) deep groove ball bearings and so on.(Know more please click here: https://www.sunspeedbearing.com/sales_center/7.html)
Deep groove ball bearings are the most widely used bearing type and have a wide range of uses. They have low friction and are optimized for low noise and low vibration which enable high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types.
·Structurally, each ring of a deep groove ball bearing has a continuous groove raceway with a cross section of about one-third of the circumference of the ball. They are mainly used to bear radial load, but also can bear certain axial load.
· When the radial clearance of the bearing increases, they have the properties of angular contact ball bearings and can withstand alternating axial loads in two directions.
· Low friction and high speed.
· Simple structure, low manufacturing cost, and easy to achieve higher manufacturing accuracy.
· Generally, stamped corrugated cages are used. Bearings with an inner diameter greater than 200mm or high-speed running are used with car-made solid cages.
More information please contact Liaocheng Sunspeed!
https://www.sunspeedbearing.com/sales_center/7.html